Start a new topic

data acquisition on a Kintex 7 DSP Kit with "FMC150"

I have tried data acquisition on a Kintex 7 DSP Kit with "FMC150" using System Generator for DSP 14.3

but it seems like there is some problem on the IN_A channel of FMC150 card. IN_B channel is OK

there are unwanted peaks with acquired data of IN_A channel

is this hardware malfuction or misconfiguation?

please refer below attachments. thank you
1 Comment

Dear Sir,


It look like you are facing timing issue in your FGPA design. Your best bet would be to contact Avnet which are actually selling the DSP Kit as well as providing technical support for this specific design.


Best Regards,
Arnaud
Login or Signup to post a comment