4DSP Products Technical support
Welcome
Login
Sign up
Home
Solutions
Forums
How can we help you today?
Enter your search term here...
Search
New support ticket
Check ticket status
Start a new topic
Discussions
FMC Products
FMC30RF
TX and RX path
C
Customer
started a topic
about 8 years ago
Hi,
i have some questions about the RX and TX path :
1) is there any filter at the TX DAC output ?
2) what are the part# for the LNA and PGA in the RX path ?
regards
4 Comments
Oldest First
Popular
Newest First
Sorted by
Oldest First
C
Customer
said
about 8 years ago
[font=Verdana]Alexandre-[/font]
1) There is a low pass filter at the output.
2) There are two fixed gain LNAs (SKY67101-396LF) and a programmable attenuator (SKY12329-350LF).
C
Customer
said
about 8 years ago
thanks for your answer.
Do you know the filter's bandwith ?
regards.
C
Customer
said
about 8 years ago
The bandwidth is approximately 70MHz.
4DSP Support
said
about 8 years ago
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Comments to this discussion are now closed!
More topics in
FMC30RF
Adding Registers to sip_fmc30rf
Reference Design Details
ZC702 + 2 FMC30RF
FMC30RF integration w/Vivado
Noise figure
Read data via Ethernet
fmc30rf schematic
60 MHz bandwidth with FMC30RF
fmc30rf transmit
fmc30rf and the trf3720
See all 59 topics
Customer
i have some questions about the RX and TX path :
1) is there any filter at the TX DAC output ?
2) what are the part# for the LNA and PGA in the RX path ?
regards