Start a new topic

FMC122 as secondary FMC - wishes for an improved version

I am using a PC720 carrier with two FMCs, the FMC125 (4 channel) and FMC122 (nominally 2 channel).

As I discovered right around the time I purchased the system, the FMC122 actually cannot communicate data from both input channels to the FPGA on the PC720 carrier, when it is attached to the LPC connector.

It would be great if a future revision of the PC720 card and/or FMC122 could provide data from both ADC channels to the FPGA.  It would also be helpful if the carrier-to-FMC sync line were connected.

1 Comment

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.