4DSP Products Technical support
How can we help you today?
Problem related to FMC150 DAC
1 Comment
4DSP Support
said
about 8 years ago
Dear Sir,
I see two way of doing that:
1) The course mixer in the DAC chip but there is a limitation (Fs/2 and Fs/4). Check the manufacturer datasheet about that. You might need to change the sampling frequency and this would mean a custom VCXO component on the FMC150 or an external clock.
2) Implement the DUC in the FPGA. You might be able to find already made cores on the internet.
Best Regards,
Arnaud
I see two way of doing that:
1) The course mixer in the DAC chip but there is a limitation (Fs/2 and Fs/4). Check the manufacturer datasheet about that. You might need to change the sampling frequency and this would mean a custom VCXO component on the FMC150 or an external clock.
2) Implement the DUC in the FPGA. You might be able to find already made cores on the internet.
Best Regards,
Arnaud
Customer
In my design,I want to use FMC150 DAC to output 70M center frequency signal,and the 25.6 M input signal is from FPGA.
Is it possible to achieve the DUC(digital up converter) function ?
If yes then what should I do ?
Thanks!