Dear Alessio,
Changing the clock frequency can result in a misalignment between the clock and the data and needs to be corrected. Do you have this issue as well when you run the FMC15xAPP with the default clock frequency?
Best regards,
Remon Zandvliet
Alessio
Hello,
I'm using ADC and DAC of FMC151 on a Virtex 6.
When i send a sinewave (for example 10 Khz) from the DAC to the ADC the signal is distorted.
I set the clock of ADC and DAC both at 120 MHz.